基本信息
标准名称: | 紧固件机械性能 螺母 细牙螺纹 |
英文名称: | Mechanical properties of fasteners-Nuts-Fine pitch thread |
中标分类: |
机械 >>
通用零部件 >>
紧固件 |
ICS分类: |
机械系统和通用件 >>
紧固件 >>
螺母
|
替代情况: | GB/T 3098.4-1986 |
发布部门: | 国家质量技术监督局 |
发布日期: | 2000-09-26 |
实施日期: | 2001-02-01 |
首发日期: | 1986-01-17 |
作废日期: | 1900-01-01 |
主管部门: | 中国机械工业联合会 |
提出单位: | 国家机械工业局 |
归口单位: | 全国紧固件标准化技术委员会 |
起草单位: | 机械科学研究院 |
出版社: | 中国标准出版社 |
出版日期: | 2001-02-01 |
页数: | 9页 |
书号: | 155066.1-17287 |
适用范围
本标准规定了在环境温度为10~35℃条件下进行试验时,规定保证载荷值的螺母机械性能。该环境温度条件下判定为符合本标准的产品,在较高或较低温度下,机械和物理性能可能不同,使用者应予注意。本标准适用的螺母:螺纹公称直径D=8~39mm(细牙螺纹);符合GB/T 192规定的普通螺纹(细牙螺纹);符合GB/T 193规定的细牙螺纹直径与螺距组合;符合GB/T 196规定的基本尺寸;符合GB/T 197规定的公差与配合;有特定的机械要求;对边宽度符合GB/T 3104或相当的;公称高度≥0.5D;由碳钢或合金钢制造的。本标准不适用于有特殊性能要求的螺母,如:锁紧性能(GB/T 3098.15);可焊接性;耐腐蚀性(GB/T 3098.15);工作温度高于+300℃或低于-50℃的性能要求。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 紧固件 机械系统和通用件 紧固件 螺母
【英文标准名称】:Screeds,basesandinsitufloorings-Part1:Concretebasesandcementitiouslevellingscreedstoreceivefloorings-Codeofpractice
【原文标准名称】:找平层,底基和现场铺筑地板材料.混凝土底基及在接收地板上的水泥找平.工作守则
【标准号】:BS8204-1-2003+A1-2009
【标准状态】:现行
【国别】:英国
【发布日期】:2003-12-22
【实施或试行日期】:2003-12-22
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Aggregates;Cementandconcretetechnology;Concretes;Constructionmaterials;Constructionoperations;Constructionsystemsparts;Design;Flatness(surface);Floorbeds;Floors;In-situconstruction;Screeds(floors);Suspendedfloors;Testmethods;Visualinspection(testing)
【摘要】:ThispartofBS8204givesrecommendationsforconstituentmaterials,design,workonsite,inspectionandtestingofconcretebasesthataretoreceiveinsituwearingscreedsofthefollowingtypes:a)concrete(seeBS8204-2);b)polymermodifiedcement(seeBS8204-3);c)terrazzo(seeBS8204-4);d)masticasphalt(seeBS8204-5);e)syntheticresin(seeBS8204-6);f)magnesiumoxychloride;g)pumpableself-smoothingscreeds(seeBS8204-7);andforbasesandlevellingscreedsthataretoreceiveflexiblefloorcoveringssuchas:h)textiles;i)linoleum;j)polyvinylchloride;k)rubber;l)cork;andrigidflooringssuchas:m)woodblockandstrip;n)laminatefloorcoverings;o)ceramictiles;p)naturalstone.Itappliestoground-supportedandsuspendedconcretefloorbases.ThispartofBS8204includestheuseofconcreteandlevellingscreedsmadewithlightweightaggregatesconformingtoBSEN13055-1.Wheretherecommendationsdifferfromthosefornormalweightaggregates,thesearegiveninAnnexA.Recommendedmethodsfortheassessmentoflevelsandsurfaceregularityandforthedeterminationofinsitucrushingresistance(soundness)aregiveninAnnexC,AnnexDandAnnexE.ThispartofBS8204isnotintendedtoprovideguidanceonthestructuraldesignorrelatedconstructionofconcreteground-supportedfloorsorsuspendedslabs.InformationontheseaspectsisgiveninBS8110-1andreference[4].ThespecificationofconcreteforbaseslabsisgiveninBS8500-2.Therecommendationsinthiscodeofpracticerelatetothoseotheraspectsofdesignandconstructionofconcreteslabsthataffecttheperformanceoftheoverlyinglevellingorwearingscreed.SeePart3forpolymermodifiedcementitiouslevellingscreeds.
【中国标准分类号】:Q17
【国际标准分类号】:91_060_30
【页数】:46P.;A4
【正文语种】:英语